May 11, 2023 · Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957. The Nashville, Chattanooga & St. Louis Railroad bought five 4-8-4 locomotives in 1930, which they called "Dixies" (instead of "Northerns" - a name that would seem inappropriate on a fine southern railroad). These 1930 "Dixies" came from the American Locomotive Company and were designated Class J-2 and assigned road numbers 565 through 569.4-8-4. The Northerns are steam locomotives that represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees ...The Atchison, Topeka & Santa Fe bought a total of 65 4-8-4s, in four batches, all from the Baldwin Locomotive Works. The first group of 14 were delivered in 1927 (road number 3751), 1928 (road numbers 3752 through 3760) and 1929 (road numbers 3761 through 3764). Curiosly, 3751 was listed in Santa Fe's diagram book as a "Heavy Mountain".N&W Class J 4-8-4 Designed for optimum-speed passenger service, the “J” was the last mainline steam locomotive to run in the United States. The Class J 4-8-4 has returned to the Bachmann HO line in a DCC Sound Value version that includes a SoundTraxx ® steam package with authentic prototypical chuff, short and long whistles, bell, air pump ...The Nashville, Chattanooga & St. Louis Railroad bought five 4-8-4 locomotives in 1930, which they called "Dixies" (instead of "Northerns" - a name that would seem inappropriate on a fine southern railroad). These 1930 "Dixies" came from the American Locomotive Company and were designated Class J-2 and assigned road numbers 565 through 569.In the case of a long locomotive like the Big Boy, articulation allowed the engine to operate on tracks with curves as sharp as 20 degrees. ALCO built the Big Boys in Schenectady, New York, and two versions of the engine were made. Starting in 1941, 20 of the 4-8-8-4-1 class engines were made and numbered 4000–4019.The Baldwin 4-8+8-4 750/8DE1 was the Baldwin Locomotive Works ' first attempt at building a road diesel locomotive. The trucks were configured in a 2-D+D-2 wheel arrangement. Only a single test unit was built. In 1943 Baldwin built an experimental "Centipede" as a demonstrator unit, which was assigned road #6000.With this in mind, the 520 class was commissioned, combining the better features of the earlier 500 and 620 class locomotives. Design. The class used the 4-8-4 configuration of the modified 500B class, but was also designed for work on branch lines with light 60 lb/yd (29.8 kg/m) rail with a reduced tender load. The considerable weight of the ... The wheel arrangement of small diesel and petrol locomotives can be classified using the same notation as steam locomotives, e.g. 0-4-0, 0-6-0, 0-8-0. Where the axles are coupled by chains or shafts (rather than side rods) or are individually driven, the terms 4w (4-wheeled), 6w (6-wheeled) or 8w (8-wheeled) are generally used. Union Pacific 4014 is a steam locomotive owned and operated by the Union Pacific (UP) as part of its heritage fleet. It is a four-cylinder simple articulated 4-8-8-4 "Big Boy" type built in 1941 by the American Locomotive Company (ALCO) at its Schenectady Locomotive Works. It was assigned to haul heavy freight trains in the Wasatch mountain range.4-8-4: 4'-8½" AT&SF: Locomotive Park, 315 W Beale St (US 93), Kingman, AZ: display: Baldwin #60385, 1928: 261: S-3: 4-8-4: 4'-8½" CMStP&P: GN Shops/Minneapolis Junction, Minneapolis, MN: operational: Alco (Schenectady) #71974, 07/1944: Restored to operation in 1993. Taken out of service in 2008. Returned to operation on December 12, 2012.The first United States 4-8-2s were in the employment of the C&O as the J-1 design, in 1911. Unlike the Hendrie 4-8-2s, this was basically an enlarged 4-6-2 for passenger trains over the Appalachians. The 4-8-2s used by the New York Central, the "Mohawks" were also an enlarged 4-6-2, essentially a K-11 type with an extra axle.Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds. HO scale UP 4-8-4. Price:$239.98. Manufacturer: Rivarossi, imported exclusively by Wm. K. Walthers Inc. P.O. Box 3039 Milwaukee, WI 53201 414-527-0770. Description: Plastic-and-metal ready-to-run Union Pacific steam locomotive. Features: Blackened metal wheels, driver tires, and side rods DCC decoder socket in locomotive Directional headlightsThe Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ...The Great Northern Railway obtained its first "Northerns" in 1929, when six Class S-1s were delivered from the Baldwin Locomotive Works. These 4-8-4s were given road numbers 2550 through 2555 and had 73" drivers, 28 x 30 cylinders, a boiler pressure of 250 psi, a weight of 472,120 lbs and a tractive effort of 68,466 pounds.Water cap. Canadian National 6213 is a preserved 4-8-4 steam locomotive on static display in Toronto, Ontario, Canada at the Toronto Railway Museum (TRM) on the lands of the former CPR John St. Roundhouse. It was on active duty until 1959 and was donated by Canadian National Railway (CNR) to the City of Toronto government in 1960. 4-8-4: 4'-8½" AT&SF: Locomotive Park, 315 W Beale St (US 93), Kingman, AZ: display: Baldwin #60385, 1928: 261: S-3: 4-8-4: 4'-8½" CMStP&P: GN Shops/Minneapolis Junction, Minneapolis, MN: operational: Alco (Schenectady) #71974, 07/1944: Restored to operation in 1993. Taken out of service in 2008. Returned to operation on December 12, 2012.Shop online for 62 4-8-4 model train locomotives at discounts up to 28%. Steam - HO is the most popular of the 3 4-8-4 model train locomotives categories, then Steam - N, and Diesel - N. Broadway Limited Imports is ranked #1 out of 4 4-8-4 model train locomotives manufacturers, followed by Kato USA Inc, and Athearn.The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ...The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ... It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer:Aug 31, 2020 · Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ... It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer:Jun 16, 2020 · O gauge Union Pacific 4-8-8-4 Big Boy by Lionel Price: $1199.99 no. 1932163 Features: O-31 operation, two can-style motors, LionChief Plus 2.0 command and sound system, smoke unit, remote coupler Low speed (cmd): 1.7 scale mph Low speed (conv) 3 smph High speed: 76.2 smph Drawbar pull: 2 lb., 2 oz. Current production road name: Union Pacific Website: lionel.com The biggest Union Pacific 4-8-4. Union Pacific class FEF-3 No. 841 stands for a builder's portrait at the American Locomotive Co. in 1944. The 10 FEF-3s were the final steam engines acquired by UP, which still operates one, No. 844, occasionally. Alco photo.4-8-4+4-8-4. Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units.What Features Do the Steam Locomotives Have? Live Steam: Steam locomotives that produce live steam look life-like when moving around the track. The puffing smoke comes out the die-cast metal stack. Wheel Arrangement: Models with 4-8-4 configurations means there are 4 leading, 8 driving, and 4 trailing wheels. You'll find other steam locomotives ... The Nashville, Chattanooga & St. Louis Railroad bought five 4-8-4 locomotives in 1930, which they called "Dixies" (instead of "Northerns" - a name that would seem inappropriate on a fine southern railroad). These 1930 "Dixies" came from the American Locomotive Company and were designated Class J-2 and assigned road numbers 565 through 569. Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display.Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display. Chesapeake & Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the ... Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ...May 12, 2023 · Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. History S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight.. The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. In 1930, the SP designed a locomotive similar to those Mountains that had a very large firebox (90.4 sq ft) and a four wheel trailing truck to support it. Thus, evolved the Southern Pacific 4-8-4 which was designated Class GS (Golden State) by the SP. In early 1937, six more "Golden States" arrived but this time from the Lima Locomotive Works.The 4-8-4 filled the same roles as the 4-8-2. The first Northerns built were intended for passenger service, and were supplied to the Santa Fe, Great Northern, Southern Pacific, and Lackawanna (which called them Poconos), to name a few roads.Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds.The 2-8-4's 4-wheel trailing truck permitted a huge firebox to be located after the boiler. The resulting greater steaming rate ensured that such a locomotive would never run out of power at speed, a common failing of older locomotives. Applying the ideas of the freight-minded Berkshire type to the Pacific resulted in a 4-6-4 locomotive. Aug 31, 2020 · Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ... Water cap. Factor of adh. Norfolk and Western 475 is a 4-8-0 "Mastodon" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line ... With this in mind, the 520 class was commissioned, combining the better features of the earlier 500 and 620 class locomotives. Design. The class used the 4-8-4 configuration of the modified 500B class, but was also designed for work on branch lines with light 60 lb/yd (29.8 kg/m) rail with a reduced tender load. The considerable weight of the ... The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483, Get Updates. Canadian National U-class 4-8-4 locomotives proved to be the most versatile of the type operated in North America. It’s generally accepted that the ultimate in steam power was the 4-8-4 Northern type, if defined by criteria that includes speed, power, technology, and, perhaps most importantly, versatility.This caught the attention of the Western Maryland and in 1947 it took delivery of twelve 4-8-4s from the Baldwin Locomotive Works. Being a "southern" railroad WM rejected the name "Northern" and called its 4-8-4s "Potomacs". These twelve Class J-1 "Potomacs" (road numbers 1401 through 1412) were designed for freight service with 69" drivers, 26 ...The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC.Water cap. Canadian National 6213 is a preserved 4-8-4 steam locomotive on static display in Toronto, Ontario, Canada at the Toronto Railway Museum (TRM) on the lands of the former CPR John St. Roundhouse. It was on active duty until 1959 and was donated by Canadian National Railway (CNR) to the City of Toronto government in 1960. HO scale UP 4-8-4. Price:$239.98. Manufacturer: Rivarossi, imported exclusively by Wm. K. Walthers Inc. P.O. Box 3039 Milwaukee, WI 53201 414-527-0770. Description: Plastic-and-metal ready-to-run Union Pacific steam locomotive. Features: Blackened metal wheels, driver tires, and side rods DCC decoder socket in locomotive Directional headlightsThe Atchison, Topeka & Santa Fe bought a total of 65 4-8-4s, in four batches, all from the Baldwin Locomotive Works. The first group of 14 were delivered in 1927 (road number 3751), 1928 (road numbers 3752 through 3760) and 1929 (road numbers 3761 through 3764). Curiosly, 3751 was listed in Santa Fe's diagram book as a "Heavy Mountain". Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ...Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds.Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. In 1930, the SP designed a locomotive similar to those Mountains that had a very large firebox (90.4 sq ft) and a four wheel trailing truck to support it. Thus, evolved the Southern Pacific 4-8-4 which was designated Class GS (Golden State) by the SP. In early 1937, six more "Golden States" arrived but this time from the Lima Locomotive Works.First run. 6 February 1981. The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape ... The Atchison, Topeka & Santa Fe bought a total of 65 4-8-4s, in four batches, all from the Baldwin Locomotive Works. The first group of 14 were delivered in 1927 (road number 3751), 1928 (road numbers 3752 through 3760) and 1929 (road numbers 3761 through 3764). Curiosly, 3751 was listed in Santa Fe's diagram book as a "Heavy Mountain".First run. 6 February 1981. The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape ...Nacional de Mexico 4-8-4 Locomotives in Mexico. The Ferrocarriles Nacionales de Mexico (National Railways of Mexico) bought a total of 32 Northern type, Class QR-1, locomotives in 1946. NdeM purchased 16 from the American Locomotive Company and 16 from the Baldwin Locomotive Works. On the NdeM these locomotives were called "Niágaras" and were ... Get Updates. Canadian National U-class 4-8-4 locomotives proved to be the most versatile of the type operated in North America. It’s generally accepted that the ultimate in steam power was the 4-8-4 Northern type, if defined by criteria that includes speed, power, technology, and, perhaps most importantly, versatility.May 12, 2023 · Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. History The B&O bought thirteen 4-8-2s from the Boston & Maine. They were given road numbers 5650 through 5662 and were designated as Class T-4 and were used until 1958. There are no surviving B&O "Mountains". The Class Ts (numbers 5500 & 5501) were scrapped in 1953.Chesapeake & Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the ... Maximum Tractive Effort: 135,375 lbs. Built for the Union Pacific Railroad as one of twenty-five 4-8-8-4 ("Big Boy") steam locomotives ordered by the UP to haul heavy freight across the Continental Divide. Big Boys are famous as among the most powerful steam locomotives ever built. Weighs 1,200,000 pounds.The Baldwin 4-8+8-4 750/8DE1 was the Baldwin Locomotive Works ' first attempt at building a road diesel locomotive. The trucks were configured in a 2-D+D-2 wheel arrangement. Only a single test unit was built. In 1943 Baldwin built an experimental "Centipede" as a demonstrator unit, which was assigned road #6000. O gauge Union Pacific 4-8-8-4 Big Boy by Lionel Price: $1199.99 no. 1932163 Features: O-31 operation, two can-style motors, LionChief Plus 2.0 command and sound system, smoke unit, remote coupler Low speed (cmd): 1.7 scale mph Low speed (conv) 3 smph High speed: 76.2 smph Drawbar pull: 2 lb., 2 oz. Current production road name: Union Pacific Website: lionel.com The biggestTo that end he ordered the company's superintendent of motive power and rolling equipment, E. Paul Gangewere, to get together with the design engineers at the Baldwin Locomotive Works to develop a plan to convert 30 of the railroad's I-10a 2-8-0 Consolidations to new 4-8-4 Northerns. These 30 steam locomotives (road numbers 2100 -2129) were ...Union Pacific 844 is a class "FEF-3" 4-8-4 "Northern" type steam locomotive owned and operated by the Union Pacific Railroad for its heritage fleet.Built in December 1944 by the American Locomotive Company (ALCO) of Schenectady, New York, No. 844 is one of four surviving FEF series locomotives and the only one in operation.Water cap. Factor of adh. Norfolk and Western 475 is a 4-8-0 "Mastodon" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line ...The Southern Pacific GS-4 is a class of streamlined 4-8-4 "Northern" type steam locomotive operated by the Southern Pacific Railroad (SP) from 1941 to 1958. A total of twenty-eight were built by the Lima Locomotive Works, numbered 4430 through 4457. GS stands for "Golden State" or "General Service." Unlike the GS-3, the GS-4 had a dual ...The class used the 4-8-4 configuration of the modified 500B class, but was also designed for work on branch lines with light 60 lb/yd (29.8 kg/m) rail with a reduced tender load. The considerable weight of the locomotive was spread over eight axles, four driving and four in the leading and trailing trucks, yielding the necessary light axle ...4-8-2. Under the Whyte notation for the classification of steam locomotives, 4-8-2 represents the wheel arrangement of four leading wheels, eight powered and coupled driving wheels and two trailing wheels. This type of steam locomotive is commonly known as the Mountain type. [1] The wheel arrangement of small diesel and petrol locomotives can be classified using the same notation as steam locomotives, e.g. 0-4-0, 0-6-0, 0-8-0. Where the axles are coupled by chains or shafts (rather than side rods) or are individually driven, the terms 4w (4-wheeled), 6w (6-wheeled) or 8w (8-wheeled) are generally used.4-8-4 Steam Locomotives. Category page. Edit. A 4-8-4 "Northern" is a type of wheel-arrangement for a large tender-type steam locomotive. Which refers to engines with 4 leading wheels, 8 driving wheels and 4 trailing wheels.Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957.Union Pacific's own team, in conjunction with Alco (both parties had also collaborated on the 4-6-6-4), significantly enlarged the Challenger to create the 4-8-8-4 Big Boy. The locomotive offered a tractive effort of roughly 135,000 pounds (37,650 pounds more than its smaller cousin) with speeds capable of 80 mph.S GAUGE 4-8-4 NORTHERN STEAM LOCOMOTIVE BY LIONEL. Price: $474.99 (no. 48054) Features: Can-style motor, die-cast metal construction, smoke unit, both RailSounds and traditional “choo-choo” chuff sounds. Pros: Captures the toy-like style of the postwar model, runs well. Cons: “Choo-choo” sounds are too high pitched and ruin the effect ...Get Updates. Canadian National U-class 4-8-4 locomotives proved to be the most versatile of the type operated in North America. It’s generally accepted that the ultimate in steam power was the 4-8-4 Northern type, if defined by criteria that includes speed, power, technology, and, perhaps most importantly, versatility.Jul 26, 2019 · The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC. The 4-8-4 was the ultimate wheel configuration for the modern passenger and fast freight steam locomotive. The eight driver arrangement was usable on almost every main line in North America and with drivers up to 80 inches in diameter allowed any reasonable speed that the railroad could handle. Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph)The Great Northern Railway obtained its first "Northerns" in 1929, when six Class S-1s were delivered from the Baldwin Locomotive Works. These 4-8-4s were given road numbers 2550 through 2555 and had 73" drivers, 28 x 30 cylinders, a boiler pressure of 250 psi, a weight of 472,120 lbs and a tractive effort of 68,466 pounds.The Nashville, Chattanooga & St. Louis Railroad bought five 4-8-4 locomotives in 1930, which they called "Dixies" (instead of "Northerns" - a name that would seem inappropriate on a fine southern railroad). These 1930 "Dixies" came from the American Locomotive Company and were designated Class J-2 and assigned road numbers 565 through 569.
Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph). Atandt internet downdetector
Water cap. Factor of adh. Norfolk and Western 475 is a 4-8-0 "Mastodon" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line ...Rio Grande Info cited Robert Schaefer's "D&RGW 4-8-4 Westerns" in "The Prospector", Volume 2 Number 2 for the very interesting origin story of this class. Originally the D&RGW was attracted to Alco's variation on the Delaware, Lackawanna & Western's 4-8-4, in part because Alco had developed a single-piece cylinder and frame casting.Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ...Water cap. Factor of adh. Norfolk and Western 475 is a 4-8-0 "Mastodon" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line ...Data from "4-8-4 Locomotives on the Northern Pacific," Baldwin Locomotives (1937), pp. 27-28 and NP to 1944 Locomotive Diagrams supplied in May 2004 by Allen Stanley from his extensive Rail Data Exchange. Works numbers were 62163-62166 in March 1938, 62167-62168. in April and 62169-62170 in May. As suggested by the 1937 account of the A-2s ... The Santa Fe 3751 is a 4-8-4 steam locomotive, which is among the half-dozen such locomotives owned by the AT&SF. The Atchison, Topeka & Santa Fe Railway was a pioneer in developing better steam locomotives in the era of the presidency of Edward H. Ripley, who served from 1895 to 1920. In 1903, AT&SF developed the 2-10-2 wheel configuration ...The Nashville, Chattanooga & St. Louis Railroad bought five 4-8-4 locomotives in 1930, which they called "Dixies" (instead of "Northerns" - a name that would seem inappropriate on a fine southern railroad). These 1930 "Dixies" came from the American Locomotive Company and were designated Class J-2 and assigned road numbers 565 through 569. S GAUGE 4-8-4 NORTHERN STEAM LOCOMOTIVE BY LIONEL. Price: $474.99 (no. 48054) Features: Can-style motor, die-cast metal construction, smoke unit, both RailSounds and traditional “choo-choo” chuff sounds. Pros: Captures the toy-like style of the postwar model, runs well. Cons: “Choo-choo” sounds are too high pitched and ruin the effect ...The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483, This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939.Southern Pacific 4449, also known as the Daylight, is the only surviving example of Southern Pacific Railroad 's "GS-4" class of 4-8-4 "Northern" type steam locomotives and one of only two GS-class locomotives surviving, the other being "GS-6" 4460 at the National Museum of Transportation in St. Louis, Missouri.Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ...Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ... It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer:The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ... In the case of a long locomotive like the Big Boy, articulation allowed the engine to operate on tracks with curves as sharp as 20 degrees. ALCO built the Big Boys in Schenectady, New York, and two versions of the engine were made. Starting in 1941, 20 of the 4-8-8-4-1 class engines were made and numbered 4000–4019.Dec 20, 2016 · The Big Boy utilized a 4-8-8-4 wheel arrangement and was the only locomotive to do so. At the front of the engine was a four-wheel leading truck that had 36 in (.91 m) wheels. This was followed by eight 68 in (1.73 m) drive wheels, with a single piston driving a set of four wheels on each side of the engine. The wheel arrangement of small diesel and petrol locomotives can be classified using the same notation as steam locomotives, e.g. 0-4-0, 0-6-0, 0-8-0. Where the axles are coupled by chains or shafts (rather than side rods) or are individually driven, the terms 4w (4-wheeled), 6w (6-wheeled) or 8w (8-wheeled) are generally used. 05001557. Added to NRHP. January 25, 2006. Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving original Spokane, Portland and Seattle steam locomotive. It was built by the Baldwin Locomotive Works in May 1938..